Fireboards are used for new constructions or for the installation of cassette stoves where there is no existing chimney breast. Certain fire resistant boards are made for construction where proper insulation is required, whereas others are utilised in order to store and redistribute the heat.

Where do I need Fireboard?

Every wall that has a external face has to have special insulation boards fitted to them. all other walls and party walls have to have fireboards fitted to them. The floors have to have a special soundproofed floating floor system over them.

When should you use fire resistant drywall?

A: Fire-rated products are not typically used in single-family residential construction except for garages. These products are primarily used in commercial construction (high rises, office buildings, industrial, institutional) and any space requiring an area separation wall such as a hotel or multi-family home.

Do I need fireproof plasterboard?

Normally two layers of plasterboard with a skim will give the required fire resistance. If you are not involving planning or building control due to a change of use, then it's up to you, any plasterboard is better than no plasterboard and as their is no room above the garage their is no additional fire spread risk.

How do you use a fireboard?

If you are using nails and adhesive, apply the adhesive first, then lift the sheet of fireboard up and place 3 nails across the fireboard at each joist. If you are just using nails, space them about 7 inches apart.

FireBoard 2: Basic Button Functions

26 related questions found

How do you cut a fireboard?

Enviroboards Fire Board can be cut with a handsaw (Medium/Fine), or Skilsaw/circular saw. Saws should be cleaned thoroughly after use.

Can you plaster fire rated plasterboard?

Fire Board

Usually fire resistant plasterboard comes with a pink face which can be painted or plastered.

What fire rating is 12.5 mm plasterboard?

Single layer 12.5mm Gyproc WallBoard each side of Gypframe 48 S 50 studs provides 30 minutes. Single layer 15mm Gyproc FireLine each side of Gypframe 48 S 50 studs provides 60 minutes.

Can you use plasterboard around a log burner?

The key rule for all flue pipe is that: Any combustible material must be three times “X” away from the flue pipe where X = the diameter of the flue pipe. ... The shield must, of course, be non-combustible (do not use plasterboard as it is not A1 fire-rated and may gradually crumble).

How do you get 30 minute fire resistance?

If you wish to keep existing doors in place because of their architectural or historical merit, these will need to be upgraded to give 30 minutes' fire resistance. This can be achieved by the application of special fire resisting paints, papers or varnishes (intumescents).

What type of drywall should be used in a garage?

Fire resistant drywall is made with glass fibers in an extra-thick design. This makes them ideal for use in utility rooms, garages and areas near a furnace or wood stove. Prevents the spread and speed of fire. Generates less smoke than traditional drywall.

When should you use 5/8 drywall?

The thickest option available, 5/8-inch drywall is ideal for commercial construction applications. 5/8-inch thick drywall is also referred to as firewall drywall. Its thickness makes it the ideal drywall for soundproofing in noisy buildings. 5/8-inch drywall can be used on walls, and will not sag when used on ceilings.

How do you fireproof a garage wall?

You can reinforce your garage walls and ceiling by adding gypsum board to any part of the garage or ceiling that connects to the main home, which will minimize the possibility of a fire in the garage reaching the house. You should also make sure that you have a fire extinguisher and heat alarm in your garage.

Is it illegal to have only one door in a house?

Just one is the minimum requirement, and it must provide direct access from the living areas of the home to the exterior without traveling through a garage. ... Mobile homes, however, are required by HUD to have two egress doors.

Do 3 storey houses need fire doors?

New build or renovated domestic properties which have 3 or more storeys (including loft conversions) must have fire doors to every habitable room off the stairwell.

What Colour is Fireboard?

Knauf Fire Panel is a pink faced plasterboard used for the Knauf Encasement system and for boarding partition systems. Knauf Fireboard is a fleece-lined plasterboard only used for encasing steel. These boards are manufactured to different standards because they are used in different applications.

What do you put on the wall behind a wood burning stove?

A fireback is a cast iron object that can be placed behind a stove to help protect a wall. Firebacks are also very decorative features that can help to enhance the look of your stove.

Can you put tiles behind a log burner?

You can absolutely use tiles around the back and sides of your wood burner – and we also want to show you some inspiration on how to liven up your wood burner with fireplace tiles!

Can I use cement board behind my wood stove?

Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.

How long is fireboard rated for?

GTEC Fire Board is a plasterboard which provides superior fire resistance for stud partitions, wall lining and ceiling systems. Achieve 60 minutes fire resistance from a 15mm single layer Siniat metal stud non-loadbearing partition system.

Can you screw into a fire rated wall?

Yes, screws may be used as an alternative to nails in fire rated assemblies, but must be substituted one for one with the head diameter and length equal or greater than required for the nails. Spacing of the screws can be no greater than that of the nails.

What makes a 1 hour fire rated wall?

According to the Engineered Wood Association, a one-hour rating indicates that a wall constructed in a manner similar to the one tested will contain flames and high temperatures, and support its full load, for at least one hour after the fire begins.

How do you cut fireboard plasterboard?

This product may be cut using a plasterboard saw or by scoring with a sharp knife and snapping the board over a straight edge. Holes for switch or socket boxes should be cut out before the boards are fixed using a utility saw or sharp knife.

What is the thinnest plasterboard you can get?

There are two standard thicknesses of plasterboard – 9.5 mm and 12.5 mm. Plasterboard sizes for walls are 12.5mm or 13mm.

Is pink plasterboard fireproof?

Gypsum plasterboard with fire resistant additives with pink paper lining for easy recognition. Gypsum plasterboard with glass fibre and additional additives to increase the fire protection characteristics with pink paper lining for easy recognition.