MOTION DETECT – Capture photo or video when motion or heat is detected. TIMELAPSE – Capture photo at periodic intervals based on the Time Lapse program setting. MUTI- SHOT -how many pictures you would like captured in a sequence when the camera is triggered (1 or 3).

Hereof, what does time lapse mean on a Moultrie game camera?

MOTION DETECT – Capture photo or video when motion or heat is detected. TIMELAPSE – Capture photo at periodic intervals based on the Time Lapse program setting. MUTI- SHOT -how many pictures you would like captured in a sequence when the camera is triggered (1 or 3).

Likewise, how do I set the time on my Moultrie camera? Slide the Mode switch to setup. To set the time and date, press the enter button and use the Up/Down buttons to change settings. Press Select to lock in the setting. Mount camera in desired location using a mounting strap.

Also, what does time lapse mean on a trail camera?

Timelapse mode is a mode of operation in which the trail camera will take a picture based on an interval of time. It will take this picture regardless of if there is anything in front of camera or not. This mode of operation does not take pictures at night.

Why wont my Moultrie take pictures?

Try a “hard reset”.

To do this: (1) remove the batteries and the SD card from the camera. (2) With the batteries and SD card removed, turn on (switch it to Quick Start, Custom Start, or On) the device for one minute. (3) After one minute, turn the camera Off, insert the batteries and SD card and turn the unit back on.

Related Question Answers

What does PIR delay mean?

Delay Time

Why does my trail camera take black pictures at night?

If your camera is taking black nighttime photos, or pink and/or white daytime photos, discolored photos, or distorted photos, then you might need to perform an IR Filter Reset. First, verify that your batteries are good and that you are using the recommended batteries and SD card.

What is Iraim on Moultrie camera?

IRAIM allows you to test the alignment of your IR sensor, so that you can record in your intended direction. The SETUP selection allows you to change the internal settings of the camera. When you move the selector to AUTO, you are ready to leave the camera in the field to record.

How do I reset my trail camera?

Hello, here are the tips to reset: 1. press and hold "Down" arrow key, 2. move power switch to "SET" position, 3. then the trail cam turns on, the passcode will be clear.

What is target recording time on trail camera?

With this function on, you can record sound while recording video. between 5–60 seconds or 1–60 minutes. Open the function, the side motion sensor will be activated. The sensitivity of the main motion sensor is set here.

What is PIR interval?

When PIR Sensor detects a continual event, the motion that happened between the interval of 5~8s later of the first motion will be detected as the second alarm. The motion that happened less than 5s after the first motion will not trigger an alarm. Thus, 5·8s is the triggering interval of the PIR sensor.

What is endless capture on trail camera?

Endless capture is actually 'loop recording'. It is a feature that when the SD card memory is full, when this feature is ON, the camera will automatically overwrite the oldest video clips on the Sd card with the newest video clip. Aintek.

What height should a trail camera be set at?

Trail cameras should be mounted at least head high. With the trail camera higher up on the tree or post, you can angle it down and increase the field of view. Most cameras shoot the best pictures, day or night, between 10 and 20 feet.

How do I connect my Moultrie modem to my camera?

Connect the Modem to the Camera

Plug the micro USB end of the cable into your Moultrie game camera's micro USB port, ensuring the rubber gasket fits snugly in the opening. Connect the other end of the USB cable into the Field Modem.

How do you set up a Moultrie XA7000i?

Log into the Moultrie Mobile App. Click on My Account and then click Activate Device. You can either enter the Modem ID and Serial Number manually or scan the barcode on the back of the modem or inside panel of the XV7000i/XA7000i integrate cameras.

How do you set up a Moultrie mobile camera?

1. Setup Moultrie Mobile Account Online. Go to and select “Register New Account”.
2. Activate Field Modem & Choose a Data Plan.
3. Prepare Your Camera.
4. Mount Field Modem MV1 Next to Or Above Camera.
5. TEST Button.
6. STATUS LED's.
7. Setting your Camera.
8. Prepare Your Modem.

How do I contact Moultrie?

1-800-653-3334

1. Cameras.
2. Moultrie Apparel.

How do I view pictures on my Moultrie game camera?

Connect the camera to your MAC using the USB Cable or SD Card/USB Converter, the SD Card should mount on your desktop as with any external drive. Double click on it to browse the card contents.

How does Moultrie Mobile work?

Very simply, you register an account on moultriemobile.com, sign up for a data plan and activate your modem. Then you connect your Moultrie trail camera (2015 models and later) to a Moultrie Mobile modem and you are good to go. You can then access that photo either through your smart-phone or your PC - in real time.

What is the modem ID on a Moultrie camera?

Where is the Serial number and Modem ID? There is a sticker on the back of the modem that will have the serial number and Modem ID, or on the inside of the door on an XV-7000i and XA-7000i. If you only have a camera, you will need to purchase a modem for it to work with our Moultrie Mobile service.

How do I check the battery on my Moultrie camera?

Slide the power switch to the ON position. The battery level will appear on the LCD Display for 2 seconds. Use the Up/Down buttons to choose between 5 different modes: 1 Photo/Low Resolution, 1 Photo/High Resolution, 3 Photos/Low Resolution, 3 Photos/High Resolution and Video.

Why do trail cameras stop working?

Many times, sd cards can lock up causing problems with the camera. Formatting the card erases all data from the card. Check to make sure the batteries are in the camera properly. If they are, replace the batteries (or test them with a ZTS Battery Tester if you have one) with new batteries.

How do I reset my camera?

Using a RESET button

1. Locate the RESET button on the camera. NOTE:
2. Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds.
3. After 2-3 seconds has elapsed, release the RESET button.
4. After the camera reboots, the time and date settings menu will be displayed.

Why is my camera taking pink pictures?

If the camera image gets pink, most common cause is that the IR-CUT did not switch off properly to filter out the invisible light. Example: 2) Power cycle the camera off and on by disconnecting the power connection. 3) Use a strong magnet and make a sweeping motion over the lens of the camera.

Why does my Moultrie camera says full?

make sure you format the internal memory 1st before inserting your sd card. If you don't, it will say its full all the time.

Why does my Moultrie Camera says card?

If it no longer reads the error message, then the card was physically locked. If it still reads the error message, it is most likely due to a problem with the SD card itself. Make sure the SD card slot of the camera is free of debris. This should be done with a can of compressed air, such as “Keyboard cleaner”.

How often do trail cameras take pictures?

Time-Lapse Mode – In time-lapse mode, the trail cam automatically snaps a picture at certain time intervals – such as every five minutes. With many models, you can choose how often a camera takes pictures and how long it will operate in time-lapse mode.

Why does my trail camera say error?

Why does my LCD show “ERR SD”? This usually means there is an issue with the SD card. Make sure you're using the recommended card (Sandisk™), storage size and class listed in your camera user's manual. Try formatting the card to FAT 32 format.

How do I format my SD card for my camera?

How to Format the SD Card in Your Android

1. Go to Settings > Device care.
2. Tap Storage.
3. Tap Advanced.
4. Under Portable storage, select your SD card.
5. Tap Format.
6. Tap Format SD card.