Coosa panels are high-density, closed-cell, polyurethane panels reinforced with fiberglass fibers to provide additional strength and stiffness. ... Coosa's panels are made of high-density foam and fiberglass and will not rot.

Can you screw into Coosa board?

Yes you can also screw into this board.

Is Coosa board waterproof?

Coosa is light weight, virtually waterproof and stronger than plywood.

Will a Coosa Board bend?

Coosa bends just like a sheet of plywood.

Does Coosa Board rot?

Coosa Composites revolutionized the industry by replacing the traditional wood structural components with our composite panels. ... Today, we support customers from a multitude of different industries who benefit from the lightweight, no rot, exceptionally strong and durable qualities of our Coosa panels.

Coosa Composite Board | Decking and Transom Material

17 related questions found

Do you have to seal Coosa board?

Do I have to encapsulate the Coosa panel in fiberglass and resin? You do not have to encapsulate a Coosa panel in fiber-glass and resin, as would typically be the case with plywood, to prevent water absorption; however, glassing the panel adds stiffness and strength.

What is similar to Coosa board?

Formerly known as Penske and similar to Coosa Board, Airex PXC can be used as a foam or balsa core replacement when thru-bolting deck hardware, plywood replacement for small-boat cockpit soles, under-deck autopilot installations etc.

Is Coosa Board flexible?

Cossa Board is a product designed to be used in more structural areas such a floor or a transom of a boat. This makes it, unfortunately, a material that is not flexible enough to make complex curves.

Can I paint Coosa board?

Yes. Coosa board can be painted with latex or enamel paints or can be laminated with just about any skin. What is Coosa board made of? Coosa board is polyurethane foam panels reinforced with continuous strand and/or woven roving fiberglass depending upon board type.

Can you use StarBoard for a transom?

Absolutely, positively, do not use StarBoard as a transom material. It's kind of slick and your outboard doesn't get a real good 'bite' into it.

What can I use for boat floor?

The 5 Best Types of Boat Flooring Materials

• Wood. It goes without saying that wood has been the material of choice for boat and ship builders for thousands of years. ...
• Linoleum or Vinyl. ...
• Specialty Paints. ...
• Canvas. ...
• Carpeting.

What can I use instead of marine grade plywood?

The 9 best marine plywood alternatives are as follows:

• Fiberboard (Medium Density Board)
• Exterior Grade Plywood.
• Fiber Cement Board.
• Birch Plywood.
• Ribbon Grain Plywood.
• Wax Resin Fiberboard.
• 3M Reinforced Polyurethane Foam Boards.
• Thermo-Lite Board.

What is composite board?

Composite board is a wood engineered with both plastic content and wood fiber that has been extruded and heated. Also known as engineered wood, this special wood material also includes ultraviolet inhibitors, pigments and borate preservatives. ... There are several types of composite board products.

What is marine grade plywood?

Marine plywood is the highest graded plywood in the plywood industry. ... The name of these plywood suggests that these are used for the boat construction industry because they are highly resistant to water. Boats require a tremendous resistance to water. Hence, they are made to withstand long exposure to water.

What is Nida Core?

NIDA-CORE STRUCTURAL HONEYCOMB PANEL – The Nida-Core honeycombs are cellular structures with an 8 mm mesh made of polypropylene, which are used to form the core of structural sandwich panels. ... The heat sealing method used to stick this non-woven material to the cellular structure provides a perfect bond.

What is Coosa board used for?

Coosa Bluewater and Nautical lightweight composite panels meet the most demanding requirements of marine applications pleasure craft and commercial and military vessels. Major boat manufacturers around the world use Coosa Composites for structural and aesthetic components for yachts down to bass boats.

What is a transom board?

It is the same as used on new boats without the aluminum transom. ... replace your worn out or rotted transom on your boat today. Boards are sold in 2x4 sheets, simply remove your old transom trace the outline on the new transom and cut to size.

What is marine board?

Marine Board is a form of HDPE plastic made specifically for use in marine and outdoor applications. This material is even stronger than typical HDPE and is specially formulated and designed to withstand harsh marine environments.

What are bass boat decks made of?

Buy enough half-inch or three-quarter-inch plywood for all the parts of the new deck, and enough epoxy resin and fiberglass cloth to coat both sides of all the deck parts. Marine-grade plywood is best, but in some areas, MDO or AB/AC exterior plywood is good enough.

What are transoms made of?

Transom construction is typically and traditionally Glass-Reinforced Plastic (GRP) with Marine-Grade Plywood Core. Modern constructions are using high-density foam or structural foam on their transom designs. However, the most common built still has Marine Plywood in its core.

What are boat transoms made of?

Many modern boat transoms are made of reinforced fiberglass material to prevent degradation when exposed to saltwater and other elements and so that they can support the weight of additional items. Most personal watercraft have one or more outboard motors on their transoms.

How do you reinforce transom?

Apply epoxy to the edges of the outer fiberglass skin of the transom and over the heads of the screws holding the skin to the plywood, and lay a strip of fiberglass cloth over the epoxy. Once the fiberglass has cured, repeat this step until four layers of fiberglass and epoxy have been applied.