No. UniFi's Fast Roaming "feature" is an optimization done in the background that doesn't require client device support. Ubiquiti hasn't made any specifics public but, in a properly designed and configured WPA2-PSK network, roaming delays should be negligible.

Thereof, should I enable fast roaming?

Thus, fast roaming should ALWAYS be enabled when you are using WPA2 Enterprise security. Therefore, to ensure maximum client compatibility, the common recommendation is to disable fast roaming when using WPA2 Personal, and only use it for WPA2 Enterprise networks.

Additionally, can I use UniFi AP without controller? UniFi APs can run by themselves without the controller unless features like guest portal is enabled (as UniFi controller also functions as a captive portal).

Just so, where do I put UniFi AP?

Do not install the UniFi AP in an open environment. Mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling. Cable feed opening must be directed away from the open environment. Cable feed must be pointed downwards when wall-mounted.

Does UniFi Support 802.11 K?

What's the break down on whether those three standards are supported on UniFi? Unifi - Fast Roaming doesn't seem updated to say if the Gen 2 AP's support 802.11r but [FIRMWARE] 3.9. 15.8011 for UAP/USW has been released seems to say that 802.11r and 802.11k are now supported.

Related Question Answers

Should I enable fast roaming UniFi?

Fast Roaming vs. Zero-Handoff Roaming. ATTENTION:Zero-Handoff is not recommended for use in UniFi deployments and is only supported on Gen1 UniFi APs. Roaming without ZHO/Fast Roaming enabled should be adequate for most environments.

What is Tplink fast roaming?

Fast Roaming is a feature that allows your Wi-Fi clients to switch their connection from one AP to another quickly to get stronger Wi-Fi signal, improving your Wi-Fi experience, as well as optimizing the load of each AP by adjusting the number of clients connected to them.

What is enable fast roaming?

Fast Roaming is a feature that allows your Wi-Fi clients to switch their connection from one AP to another quickly to get stronger Wi-Fi signal, improving your Wi-Fi experience, as well as optimizing the load of each AP by adjusting the number of clients connected to them.

How do I turn on wireless roaming?

WiFi Roaming Sensitivity or Aggressiveness

1. Open Device Manager.
2. Locate Network Adapters.
3. Select your network or wireless device.
4. Right-click > Properties > Select the Advanced tab.
5. Choose Roaming Aggressiveness (or Sensitivity)
6. Set the preferred value from the drop-down menu: Lowest. Medium-low. Medium. Medium-High. High.

Does iPhone support fast roaming?

Wi-Fi optimization

Both roaming and device battery life have been improved with features like: 802.11k to deliver the list of neighboring access points. 802.11r and Cisco Adaptive 802.11r to help iPhone and iPad quickly and securely roam between access points.

Does Android support fast roaming?

Does Android support the 802.11 specifications that allow fast roaming, i.e. prevent dropouts as you move between access points? When the signal strength of the current AP weakens, device will scan for target APs from this list.

What is fast roaming on WiFi?

Fast roaming, also known as IEEE 802.11r or Fast BSS Transition (FT), allows a client device to roam quickly in environments implementing the WPA2 Enterprise security, by ensuring that the client device does not need to re-authenticate to the RADIUS server every time it roams from one access point to another.

How does WiFi roaming work?

What is Roaming and How Does it Work? Roaming occurs when a wireless client device moves outside the usable range of one wireless access point (AP) and connects to another AP—usually one with a stronger signal. As long as the APs are setup properly, client devices can roam seamlessly from one AP to another.

Which UniFi AP should I get?

For around $100 the WiFi 6 Lite is the better overall option, and the WiFi 6 LR is the better option if you need the range. Oddly enough, the AC-LR does have a better 2.4 GHz radio than the WiFi 6 Lite, due to Ubiquiti's odd choice only upgrade the 5 GHz radio to Wi-Fi 6.

How do I connect to UniFi AP?

Step 1a: connect the access point

1. Take the power cable and network cable for the access point.
2. Plug 1 end of the network cable into the access point.
3. Plug the other end into the (modem) router.
4. Plug power cable into a free socket.
5. Plug the other end of the power cable into the access point.

How do I unmount UniFi AP?

In order to release an AP slide a flat, thin object (firm zip ties are the Community favorite) into the locking notch of the AP (opposite of the cable feed hole) and twist counterclockwise. The zip tie (or similar) needs to be firm enough to lift the latch (away from the UAP) and allow the AP to twist.

How do I SSH into an UniFi AP?

Open your favorite SSH client (PuTTY for windows) or Terminal on any other OS. Use the IP address for the AP found in DHCP to SSH into the AP with the default user/password provided ubnt/ubnt or root/ubnt. Next you will receive a splash screen of ASCII text saying UniFi and be at a command prompt.

How do I access Ubiquiti AP?

Windows users: Start > All Programs > Ubiquiti UniFi. 2. The UniFi login screen will appear. Enter the admin name and password in the appropriate fields and click Login.

How do I add UniFi AP to my controller?

Connect the new Ubiquiti AP to your network, using the PoE injector if needed. In a few seconds you'll get a list of devices–one of them will be the new Unifi AP. Login to Unifi controller . Go to the Devices page and click Adopt next to the newly shown AP.

Can you use Ubiquiti access point with any router?

Yes.

How do I reset my Ubiquiti AP?

Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Alternatively, the UniFi AP may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter.

Is UniFi AP directional?

Since most UniFi access points are designed to be mounted on the ceiling or wall, the signal has been optimized for the direction opposite of the mounting side or in the direction facing the U symbol.

Do I need the Unifi controller?

Do I need to pay for a Cloud solution? Only one instance of the UniFi Controller is required, even for multiple sites. For example, use either the UniFi Cloud Key or a local server, not both. A UniFi Cloud Key can be used as a remote controller.

What does the Unifi controller do?

The UniFi® Controller is a wireless network management software solution from Ubiquiti Networks™. It allows you to manage multiple wireless networks using a web browser.

Can I use USG without controller?

Yes, the Ubiquiti USG will function without a Unifi Cloud Key but it will need to be setup with a Unifi Controller running on hardware other than a Unifi Cloud Key.

What is BSS transition Ubiquiti?

BSS Transition: When a device has a weak signal, UAP will send roaming “BSS transition” frame instead of disconnection frame to client. Proxy ARP: Reduces airtime by having UAPs proxy common broadcast frames as unicast.

What is BSS transition with Wnm?

BSS Transition Management enables an AP to request a voice client to transition to a specific AP, or suggest a set of preferred APs to a voice client, due to network load balancing or BSS termination. This helps the voice client identify the best AP to which that client should transition to as that client roams.